ELUMaTEC DG-244 DOUBLE MITRE SAW, 6 METER CAPACITY - ELUMATEC DG 244

Description

ELUMaTEC DG-244 DOUBLE MITRE SAW, 6 METER CAPACITY - ELUMATEC DG 244
Manufacturer
ELUMATEC
Manufacturing Year
2001
Stock Number
12873
Serial Number
Model
DG 244
Type
Miter Saws
REQUEST A QUOTE
Specifications Below
▾
Specifications
Power 4.0
Fully functional double mitre saw Elumatec DG 244 with the proven PC control Elumatec E 255.
Description:
The proven elumatec principle "sawing from below":
- Thereby freely accessible support tables
- Large saw blade diameter and optimal utilization of the saw blade offers sufficient cutting capacity for all cutting variants.
- A matter of course for elumatec: Outside dimension cutting for all angle settings. Therefore no different length calculations are necessary for different profile heights.
- The universal swivelling and tilting of the sawing units enables sawing of high and wide profiles as well as all types of compound cuts. Thereby many profiles can be cut without shims - outside dimension cut with all cutting variants. Therefore no complicated length calculations are necessary. Big advantage with special angles
Technical data:
- Smallest cutting length at 90° 375 mm
- Smallest cutting length at 45° inclined 375 mm
Maximum length of work piece 6000 mm
ALU PVC STEEL
DG 244 DOUBLE MITRE SAW
HOME / PRODUCT RANGE / DOUBLE MITRE SAWS
DESCRIPTION TECHNICAL DATA
The reliable elumatec principle “Cutting from below”:
Provides unhindered access to support table
A large saw blade diameter and optimal use of the saw blade offer an ideal cutting capacity for all cutting variations
Standard for elumatec: external dimension cuts at all angle positions. This means no length calculations are necessary when cutting profiles of different heights. This is a big advantage when cutting special angles
The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre cut. Consequently, many profiles can be cut without support blocks
Safety hoods
Equipped with saw blades as standard
Pulsed coolant system
Movable work piece support
Cutting length variants
6,000 mm
Minimum cutting length at 90° 375 mm
Minimum cutting length tilted at 45° 375 mm
Pivoting range inwards, pneumatically, 90° - 45°
(manually up to 22.5° inwards and up to 140° outwards with digital display)
Tilting range inwards, pneumatically, 90° - 45°
(intermediate angles manually adjustable with digital read-out display and turret stop)
For cutting range, see cutting diagram
Saw blade diameter 550 mm
Saw blade speed 2,250 rpm
Power supply 480 volts
Power output per motor 4 kW
Compressed air supply 7 bar
Air consumption per working cycle 40 l without spraying, 64 l with spraying